The AIR XD offers two user configurable alarms. Each alarm requires four parameters to be selected and configured:
1. Assigned a PM size/channel (PM1.0, PM2.5, PM4.25, PM10.0 and TSP)
Select one of the four configured PM sizes or TSP as the alarm source.
2. Assigned a data source/channel
Select whether to act on live data readings or one of the pre-configured averages (15 minutes to 8 hours).
3. Assigned a threshold (μg/m3 and mg/m3)
Set the value at which the alarm will trigger (1 μg/m3 to 9,999 μg/m3 or 0.1 mg/m3 to 6,553.5 mg/m3.
4. Assigned latching of non-latching behaviour
Choose whether the alarm stays active once the fault condition is cleared or is self-clearing (non-latching). For non-latching selections, alarms will be cleared but the event will be logged.
Note: Once the alarm is triggered, the corresponding relay will then switch, and an alarm message is displayed on screen. All alarms are logged in the AirXD event log
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article