How to configure alarms for a Trolex AirXD

Modified on Thu, 29 Feb at 12:08 PM

To configure the alarms for the Trolex AirXD please follow the steps below:

1. Select the Appropriate Channel

The AIR XD has two alarm channels that can be assigned one of four particulate sizes or TSP. To select the appropriate channel, goto Settings -> Alarms -> Alarm 1 -> Channel Select. Then select the PM size that you want to monitor, as shown below:

2. Select the Threshold Channel

Select and assign an alarm to a specified data source. To select the data source, goto Settings -> Alarms -> Alarm 1 -> Channel Select. Then select the PM size that you want to monitor, as shown below:

3. Set Alarm Threshold

Set the threshold value, which activates the alarm. Threshold values can be configured between 1 μg/m3 to 9,999 μg/m3 or 0.1 mg/m3 to 6,553.5 mg/m3. To set the threshold, goto Settings -> Alarms -> Alarm 1 -> Set Threshold. Then select enter the value of the threshold as shown below:

4. Set Alarm Latching

Configure the latching behaviour for the selected alarm. To set the alarm latching, goto Settings -> Alarms -> Alarm 1 -> Latching En/Dis. Then select whether you want to enable or disable latching as shown below:

5. Enable/Disable the Alarm

Enable to disable audio-visual alarms for selected alarm.. To enable or disable the alarm, goto Settings -> Alarms -> Alarm 1 -> Enable/Disable. Then select whether you want to enable or disable as shown below: