PM size range: PM1.0, PM2.5, PM4.25, PM10 TSP
TSP range: Up to 40 μm displayed in mg/m3 or μg/m3
Extended range: TSP indicative up to 150 μg displayed in mg/m3 or μg/m3
PM measurement range: 0.35 to 40 μm over 24 bins
PM measurement capability*: Up to 1,500 mg/m3
PM continuous operating range**: Up to 25 mg/m3
PM density: 0.8 g/ml - 8.0 g/ml (default: 1.65 g/ml)
PM measurement units: mg/m3 or μg/m3
Averaging period: 1 second to 24 hours
Averaging channels: ~1.5 L/m (nominal)
Sampling interval: ± 25%
Particle count: Up to 10,000 (particles/second)
Flow rate: Dynamic (1.2 L.min nominal)
Total flow rate: 5.5 L/min (typical)
Accuracy: ± 5%
Ambient temperature limits: -10 to 45 °C
Humidity: 0 to 95% RH (non-condensing)
Protection classification: Main enclosure, dust and waterproof: IP66
Particulate flow path (cap open): IP22
Particulate flow path (cap closed): IPX6
Housing material: Polymer coated stainless steel
Cable entries: 5 x M20 with removable blanks
1 x M20 breather gland (where specified)
1 x M20 USB connector (where specified)
Power: 100 V to 240 V ac 50/60 Hz
9 to 36 V dc
Supply current: 100 mA nominal ac variant
660 mA nominal dc variant
Power consumption: 6W
Inrush current: 350 mA peak
Relay outputs: Two configurable (alarm outputs)
Dry contact
Maximum rating 36 V ac/dc 300 mA (internal overcurrent and overvoltage protection fitted)
4 - 20 mA outputs: Two configurable (real time or average readings)
R1 and R2 with adjustable setpoints
Maximum attached load: 280 Ω
Communications: RS485 data output with MODBUS RTU protocol
Ethernet (MODBUS TCP/IP optional)
Data download: External USB interface
Instrument data storage: 8 GB > 10 years (log rate dependent)
User interface: 128 x 64 dot matrix display with RGB backlight
Visual alarms: Display RGB backlight
Indicators: 1 x green high brightness LED – sensor heartbeat
1 x blue high brightness LED – communications
*The instrument can define particulate measurement peak trends up to the quantity specified.
**During sustained high dust loading periods, the instrument will report on PM data up to the quantity specified.
Note: Sustained exposure to PM quantities above 25 mg/m3 will be logged; however, this may affect the operating life of the OPC.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article