Sensing technology: Optical refraction technology (ORT) Light-scatter photometer (OPC)
Particulate measurement: Target RCS identification range 1 to 10 μm
Max. typical dust loading*: 150 mg/m3
Continuous range: 25 mg/m3
Displayed data: RCS mg/m3, Total particles/litre
Resolution: 1,000th of a mg
Averaging period: 15 minutes, 1, 4, 8 and 12 hours (rolling average)
Sampling interval: 1 to 60 seconds
Particle count: > 600 particles/second
Total airflow rate: ~1.5 L/m (nominal)
Typical RCS accuracy: ± 25%
Operating temperature: -10 to 45 °C
Humidity: 0 to 95% RH (non-condensing)
Housing material: PC/ABS – stainless steel
Ingress protection: Main enclosure: IP66, Particle flow path, cap open: IP22 Particulate flow path (cap closed): IPX6
Weight: 8.2 kg
Dimensions: Height 387mm, Width 305mm, Depth 156mm
Cable entries: 3 x M20 with removable blanks, 1 x M20 breather gland, 1 x M20 USB connector
Nominal power supply: 100 to 240 V ac 50/60 Hz, 9 to 18 V dc
Power consumption: 15 W
Communications: RS485 data output with MODBUS RTU protocol, Ethernet (MODBUS TCP/IP) - not implemented yet
External power output: 2 x 15 V dc 1 A outputs (for powering external devices)
Connectivity: Trolex BreatheXS software
Data download: External USB interface
Data storage: 6 GB
Display: 128 x 64 dot matrix display with RGB backlight
User interface: Navigation keypad (membrane)
Visual alarms: Custom alarm setpoints, Latching/non-latching
Indicators: 1 x green high brightness LED – sensor heartbeat, 1 x blue high brightness LED – communications
Self-test routine: Sensor hardware, circuitry and communications on power on Manual self-test during use
Certification: CE compliant
*The instrument can define particulate measurement peak trends up to the quantity specified.
Note: Sustained exposure to dust quantities above 25 mg/m3 will be logged; however, it may affect the operating life of the AIR XS sensor.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article