How to add an XD One or XD1+ device to BreatheLITE

Modified on Mon, 5 Feb at 4:46 PM

Automatically Add a Device

By default, BreatheLITE should automatically detect the connected devices. However if the Automatic Device Discovery service has been turned off, it is still possible to automatically detect devices by following the steps below:

1. To automatically add a new device, connect the device to the computers USB port before following the steps below:

2. In the Devices section, click on the Actions button and click on Automatic Device Scan as shown below:

3. A loading message will be displayed while the app automatically detects all of the connected devices.

4. Once the app has finished scanning the new device(s) will be displayed in the Devices section as shown below:

Manually Add a Device

To manually add a new device, connect the device to the computers USB port before following the steps below:

1. In the Devices section, click on the Actions button and click on Manually Add Device as shown below:

2. A new popup will be displayed asking you to enter the devices serial number and model:

3. Enter the devices serial number into the text box and select the device model from the drop down. After entering the information, click on the Add button. The device serial number can be found on the product label.

4. The new device will be displayed in the Devices section as shown below:

5. Before downloading data from the device, the COM port of the device will need to be configured. Click on the Settings section and choose the devices COM port as shown below:

6. Once the COM port has been configured, click on the Save button.