How to silence an alarm on the Trolex XD One

Modified on Tue, 13 Feb at 1:39 PM

In the event that a warning alarm is triggered, the XD One will auto-latch to ensure that
a conscious action is made to acknowledge the warning. During alarm state, users can acknowledge triggered alarms which will silence the audio alarm; however, the LED warning indication will remain illuminated (solid) to indicate the alarm conditions are still present.

At the point of particulate levels decreasing below the permissible threshold (95%) of the alarm set point, the alarm will reset and the illuminated LED will switch off.

To acknowledge a latched alarm, press and hold the power button for 2 seconds then release after which the XD One will confirm with an LED sequence: scrolling illumination of alarm colour, followed by a scrolling green sequence.

Note: If an alarm is not acknowledged by the user, the XD One will remain latched with the illuminated LED and audio warning indefinitely.

The XD One device will only re-alarm on increasing or continued particulate levels above the permissible threshold, after the original alarm has been user acknowledged and self-cleared.