Once data has been imported into Breathe or live data has been captured, it is possible to view this historical data in a chart by following the steps below:
1. On the main menu click on the Live Data option and the following screen will be displayed:
2. There are two types of charts that can be displayed, a reading vs time chart or a size distribution chart. To learn more about these charts, please read below:
Reading vs Time Chart
The reading vs time chart allows you to view multiple sensor readings from multiple devices over a period of time. To view the sensor vs time chart please follow the steps below:
1. Firstly on the Chart Type drop down box, select the Reading vs Time option.
2. Next select the devices that you wish to view the data for, by clicking on the Devices drop down box and selecting the device or devices.
3. After selecting the devices, it is now time to select each sensor that is to be displayed on the chart. Click on the Sensors drop down box and select the relevant sensors or sensors.
4. The next option is to choose whether to view the data in ug/m3 or mg/m3 by selecting the relevant option in the Units drop down box.
5. To view any alarm annotations on the chart click the Show Alarm Annotations check box.
6. The next step is to choose the date range of the chart by selecting the Start Date and End Date by clicking on the boxes and using the calendar to select the relevant dates.
7. To view the chart click on the Actions button and click on View Chart button. The chart will then be displayed as shown below:
Size Distribution Chart
The size distribution chart allows you to view the particle size distribution from a single device over a period of time. To view the size distribution chart please follow the steps below:1. Firstly on the Chart Type drop down box, select the Size Distribution option.
2. Next select the device that you wish to view the data for, by clicking on the Devices drop down box and selecting a device.
3. The next step is to choose the date range of the chart by selecting the Start Date and End Date by clicking on the boxes and using the calendar to select the relevant dates. Note: only a time difference of an hour is allowed to be charted.
4. To view the chart click on the Actions button and click on View Chart button. The chart will then be displayed as shown below:
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article